Description: This is a kit that gives you all of the basic thru-hole components you will need to get started playing with embedded projects. These are the 'bubble gum' parts that we regularly use. A good starter assortment of caps, resistors, ICs, regulators, diodes, and good-for-blinky LEDs. Be sure to look through our tutorials for some great projects.

You may notice there are very few resistors in this kit. We recommend purchasing the resistor kit listed below for all the resistor values you may need.

Included Components:

• 1 - Parts Box
• 10 - 0.1uF cap
• 5 - 100uF cap
• 5 - 10uF cap
• 5 - 1uF cap
• 5 - 10nF cap
• 5 - 1nF cap
• 5 - 100pF cap
• 5 - 10pF cap
• 5 - 1N4148 Diode
• 5 - 1N4001 Diode
• 5 - 2N3906 PNP Transistor
• 5 - 2N3904 NPN Transistor
• 3 - 20 pin female header
• 3 - 20 pin male header
• 3 - Mini power switch
• 2 - Push buttons
• 2 - 10k trimpot
• 2 - LM358 OpAmp
• 2 - 3.3V regulator
• 2 - 5V regulator
• 1 - 555 Timer
• 1 - Green LED
• 1 - Yellow LED
• 1 - Red LED
• 1 - 7 segment Red LED
• 1 - mini Photocell